top of page

Transfer cabin with ventilation 106.02


  • with electric lock

To transfer small items and material between rooms with different cleanliness classes, you can use a transfer lock (cabin) installed directly in the partition panel. The walls, ceiling and floor of the transfer cabin are made of sandwich panels. If it is necessary to ensure a laminar air flow, a HEPA filter is installed inside the transfer cabin in its ceiling with an opening. A grate is installed in the lower part of the right door leaf to remove air from the airlock.

In cases where it is possible to install an adjustable ventilation grille in the panel, the bottom of the cabin consists of a perforated metal sheet, under which there is a receiving tray.

Products are certified in EU countries.


  • The window consists of a stiffening profile, a cladding frame and glass thicknesses. 4 or 6 mm.

  • The inner frame is attached to the metal partition with blind rivets.

  • The cladding frame is screwed to the inner frame.

  • Glass sheet thicknesses. 4 or 6 mm. The frame is sealed with double-sided tape and mastic.

  • AISI 304 stainless steel one-sided glazing can be supplied upon agreement.

  • The cladding frame and inner frame are powder coated.

  • The color is identical to the shade of the partitions (standard RAL 9016, 9002, other shades upon agreement).


bottom of page